ŞEHİR e-arşiv

Browsing College of Engineering and Natural Sciences by Issue Date

Browsing College of Engineering and Natural Sciences by Issue Date

Sort by: Order: Results:

  • Szilvia, Paxian; Szücs, Veronika; Shirmohhamadi, Shervin; Aberšek, Boris; Lazarov, Andrean; Isacker, Karel Van; Sik-Lanyi, Cecilia (Springer, 6-07)
    This paper introduces the “Intelligent Serious Games for Social and Cognitive Competence” project. The aim of these games are to teach youth with disabilities on creativity. The development of interactive mobile games and ...
  • Yanmaz, Evşen; Güçlü, Hasan (Institute of Electrical and Electronics Engineers, 2010)
    In this work, we study the target detection and tracking problem in mobile sensor networks, where the performance metrics of interest are probability of detection and tracking coverage, when the target can be stationary ...
  • Boyraz, Özdal; Tien, En-Kuang; Gao, Shiming (Society of Photo-optical Instrumentation Engineers, 2010)
    Nonlinear silicon photonics has been an immense research subject in the past several years with promising prospects of delivering chip scale signal modulation, shaping and characterization tools. In particular, broadband ...
  • Savaş, Erkay; Koç, Çetin Kaya (Institute of Electrical and Electronics Engineers, 2010-06)
    Cryptography is one of the most prominent application areas of the finite field arithmetic. Almost all public-key cryptographic algorithms including the recent algorithms such as elliptic curve and pairing-based cryptography ...
  • Dikbaş, Salih; Arıcı, Salih; Altunbaşak, Yücel (Institute of Electrical and Electronics Engineers, 2010-07)
    In this letter, a new fast motion estimation (FME) algorithm capable of producing sub-sample motion vectors at low computational-complexity is proposed. Unlike existing FME algorithms, the proposed algorithm considers the ...
  • Yao, Gavin Xiaoxu; Cheung, Ray C.C; Koç, Çetin Kaya; Man, Kim Fung (IEEE, 2010-12)
    As an important component of Spectral Modular Arithmetic (SMA) cryptographic co-processor, the efficient architectures of Number Theoretic Transforms (NTTs) on FPGA are discussed in this paper. We analyze characteristics ...
  • Tekiner Moğulkoç, Hatice; Coit, David W.; Felder, Frank A. (Elsevier, 2010-12)
    A new approach to the electricity generation expansion problem is proposed to minimize simultaneously multiple objectives, such as cost and air emissions, including CO2 and NOx, over a long term planning horizon. In this ...
  • Mesgarani, Ali; Tekin, Ahmet; Ay, Suat U. (IEEE, 2011)
    This paper presents a new analog to digital converter (ADC) architecture targeting ultra high speed and low power applications. The proposed ADC enables operation of SAR ADCs in a pipelined fashion trading latency for ...
  • Saldamlı, Gökay; Baek, Yoo-Jin; Koç, Çetin Kaya (IEEE, 2011)
    We describe a method of carrying multiplication in the binary extension fields. The new method fully operates on the Fourier representations of the field elements by successively applying the convolution property and a ...
  • Koç, Muammer; Mahabunphachai, Sasawat; Billur, Eren (Springer Verlag, 2011)
    Stainless steel sheet alloys have been increasingly used in heating, ventilating, and air conditioning; appliance; sanitary and medical devices; as well as several structural and transportation applications, due to their ...
  • Huang, Yuewang; Tien, En-Kuang; Gao, Shiming; Kalyoncu, Salih K.; Song, Qui; Qian, Feng; Boyraz, Özdal (Society of Photo-optical Instrumentation Engineers, 2011)
    In this study, we demonstrate method for quasi phase matched silicon-on-sapphire waveguides suitable for MWIR wavelength conversion to achieve higher conversion efficiency than that can be achieved in uniform waveguide ...
  • Aksakallı, Vural; Fishkind, Donniell E.; Priebe, Carey E.; Ye, Xuang (Wiley, 2011)
    The problem we consider is a stochastic shortest path problem in the presence of a dynamic learning capability. Specifically, a spatial arrangement of possible obstacles needs to be traversed as swiftly as possible, and ...
  • Mahabunphachai, Sasawat; Carsley, John E.; Koç, Muammer (American Society of Mechanical Engineers, 2011)
    Material behavior of AA5754 was investigated under different forming process conditions, including two loading conditions (uniaxial tensile and biaxial bulge), several strain rates (constant strain rates at 0.0013 and ...
  • Kalyoncu, Salih K.; Gao, Shiming; Tien, En-Kuang; Huang, Yuewang; Yıldırım, Doğukan; Adas, Enver; Wabnitz, Stefano; Boyraz, Özdal (Society of Photo-optical Instrumentation Engineers, 2011)
    Wavelength tunable synchronous pulse sources are highly desirable for spectroscopy and optical diagnostics. The common method to generate short pulses in the fiber is the use of nonlinear induced spectral broadening which ...
  • Huang, Yuewang; Kalyoncu, Salih Kağan; Tien, Enkuang K.; Gao, Shiming; Song, Qi; Qian, Feng; Adas, Enver; Yıldırım, Doğukan; Boyraz, Özdal (Society of Photo-optical Instrumentation Engineers, 2011)
    With a transparency window up to 6 μm, sapphire can serve as a platform to support silicon photonic integrated circuit in MWIR. Planar waveguide devices based on silicon-on-sapphire (SOS) are emerging as a bridge between ...
  • Aksakallı, Vural; Tekiner Moǧulkoç, Hatice; Koç, Muammer (Ankara Center for Turkish Policy Studies, 2011)
    The changes in Turkey's political landscape over the past decade have been quite dramatic. In this study, we present a quantitative analysis of the 2011 national elections based on clustering techniques and we compare our ...
  • Koç, Muammer; Özel, Tuğrul (Wiley, 2011)
    This book is the first of its kind to collectively address design-based and mechanical micro-manufacturing topics in one place. It focuses on design and materials selection, as well as the manufacturing of micro-products ...
  • Dur, Ender; Cora, Ömer Necati; Koç, Muammer (Elsevier, 2011)
    Metallic bipolar plates are one of the promising alternatives to the graphite bipolar plates in proton exchange membrane fuel cell (PEMFC) systems. In this study, stainless steel (SS304, SS316L, and SS430), nickel (Ni 270), ...
  • Koç, Muammer; Mahabunphachai, Sasawat (Wiley, 2011)
    This book is the first of its kind to collectively address design-based and mechanical micro-manufacturing topics in one place. It focuses on design and materials selection, as well as the manufacturing of micro-products ...
  • Foreword 
    Koç, Muammer; Özel, Tuğrul (Wiley, 2011)
    This book is the first of its kind to collectively address design-based and mechanical micro-manufacturing topics in one place. It focuses on design and materials selection, as well as the manufacturing of micro-products ...

Search ŞEHİR e-arşiv


Advanced Search

Browse

My Account